Positioning Detail Of Electric Defrost Heaters; Proper Access To Model - Modine ECO GLE serie Betriebsanleitung

Positioning detail of electric defrost heaters

GLE
21EM5 ED
22EM5 ED
23EM5 ED
34EM5 ED

Proper access to model

Deflector
Support bracket
Inner
drip trays
14
www modine com
Heater clip
RSA
Heater connection
Drip tray
Heater clip
GLE
34FM5 ED
Motor connection
Fan shroud
Drain connection
Access
1. Disconnect condensate drain connection and position as to avoid hampering
with drip tray.
2. Remove deflector and unfasten screws "A" of drip tray.
3. Bring drip tray to the position shown in drawing.
4. To reach the heaters placed under the coil remove the inner drip trays by
unfastening screws "B".
5. It is possible to reach the header site by unfastening screws "C" and
removing the fan shroud.
Remounting
1. Reposition the drip trays and fan shrouds by fastening screws "B" and "C".
2. Reposition the drip tray and fasten it with screws "A".
3. Reposition deflector and reconnect condensate drain connection.
RSA
RBA - Electric heaters in coil
RSA - Electric heater in inner drip tray