Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Select Phase item by using
Use
/
button to adjust the value.
Dot Clock
Dot
Clock
adjustments
interference that appear as vertical banding
in
dot
intensive
spreadsheets or paragraphs or text in smaller
fonts.
Select Dot Clock item by using
buttons. Use
/
Displaying TV Information
Programme Number, Programme Name,
Sound Indicator and Zoom Mode information
is displayed on the screen when a new
programme is entered or
pressed.
Mute Function
Press
button to disable sound. Mute
indicator will be displayed in the upper side
of the screen.
To cancel mute, there are two alternatives; the
first one is pressing the
second one is increasing the volume level.
PIP (Picture-in-Picture) and PAP
(Picture-and-Picture) Modes
Press the
button to switch to PIP mode.
At PIP Mode, a small picture (PIP picture) is
displayed on the main picture. There are 1
size and 4 positions (upper left, upper right,
bottom left and bottom right) available for the
PIP window. You can use
the PIP position. Aspect Ratio of the PIP
window is fixed and 4:3.
When PIP Mode is entered, the default active
window is the PIP window and the active
window is indicated by a red frame around it.
or
buttons.
correct
presentations
button to adjust the value.
button is
Mute
button and the
button to change
The active window can be changed by
pressing
belongs to active window. The place of the
status OSDs are same for both windows.
the
Press the
mode.
like
Press the
At PAP Mode, two pictures with equal sizes
or
are displayed on the screen. Aspect Ratios of
the windows are fixed.
When you switch to PAP Mode, main window
in PIP Mode will be displayed on the right side
of the screen. The active window can be
changed by pressing
Press the
mode.
Note: When main picture source is TV, EXT-1,
EXT-2, or BAV, S-VIDEO; PAP or PIP
window can only be set to HDMI-1, HDMI-
2, YPBPR, PC source or vice versa.
Picture Mode Selection
By pressing PP button, you can change
Picture Mode settings in accordance with
your viewing requirements.
Freezing Picture
You can freeze the picture on the screen by
pressing the OK button on the remote control.
Press the OK button to freeze picture. Press
again to quit freeze mode.
Note: This feature will be unavailable to be used
while watching PC, YPBPr and HDMI sources.
Zoom Modes
You can change the aspect ratio (image size)
of the TV for viewing the picture in different
zoom modes.
Press
zoom mode.
English - 97 -
/
button. The status info OSD
button again to exit the PIP
button to switch to PAP mode.
/
button.
button again to exit the PAP
button to directly change the
/WIDE
Werbung
Kapitel
