Manual Search; Clear Service List (*) - Tech Line TL-37LC783 Bedienungsanleitung

After search is completed for digital channels,
a message asking whether to search for
analogue channels appears on the screen:
Do you want to search for
analogue channels?
Yes
Highlight "Yes" and press OK button to search
for analogue channels. The following menu
appears on the screen for analogue channel
search:
Country
Language
TXT Language
PLEASE CHECK ANTENNA CABLE
AUTO PROGRAMMING SYSTEM
Select your Country, Language and Text
language by using
Press OK or RED button to continue. To cancel,
press BLUE button. The following menu will
be displayed during the automatic tuning:
APS is running...
UK
P 03 - C 04
No
Ok
D
Cancel
or and  / 
63.75 MHz
6%
63.75 MHz
Cancel
After APS is finalized, the programme table
will appear on the screen. In the programme
table you will see the programme numbers
and names assigned to the programmes.
If you do not accept the locations and/or the
programme names, you can change them via
Program Table. See "Install Menu" section.
All channels found are stored in a sorted form
with respect to their channel numbers. Some
services may not appear with the correct
channel number. This is because some
broadcasters have no channel number
information.

Manual Search

In Manual Search, the number of the multiplex
is entered manually and only that multiplex is
searched for the channels. For every valid
channel number, signal level, signal quality
and network name are shown at the bottom
of the screen.
In both manual and auto search any existing
channel in the database is not re-stored to
avoid redundant duplicates of that channel.
buttons.

Clear Service List (*)

(*) This setting is visible only when the Country
option is set to Denmark, Sweden, Norway or
Finland.
Use this setting to clear channels stored.
Press

List and then press OK. The following OSD
will be displayed on the screen:
Are you sure you want to delete all channels?
Press OK to cancel.
Select Yes by pressing
press OK to delete all of the channels.
English - 81 -

or button to select Clear Service
Yes

No
or  button and