Werbung
Verfügbare Sprachen
Verfügbare Sprachen
User by pressing
desired frequency by
increase or decrease the frequency gain by
pressing
/
button.
Press the MENU button to return to the previous
menu.
Note: Equalizer menu settings can be
changed only when the Equalizer Mode
is in User.
Balance
This setting is used for emphasizing left or
right speaker balance.
Press
or
button to select Balance. Press
/
button to change the level of the balance.
Balance level can be adjusted between -32
and + 32.
Headphone
Press
or
button to select Headphone.
Press
button to view the headphone menu.
Headphone sub-menu options are described
below:
Volume
Press
or
button to select Volume. Press
button to increase headphone volume level.
Press
button to decrease headphone
volume level. Headphone volume level can
be adjusted between 0 and 63.
Balance
Press
or
button to select Balance. Press
button to increase balance to the right. Press
button to decrease balance to the left.
Balance level can be adjusted between -32
and +32.
Press the MENU button to return to the previous
menu.
Sound Mode
Press
or
button to select Sound Mode.
Using
/
button, you can select Mono,
/
button. Select the
or
button and
Stereo, Dual I or Dual II mode, only if the
selected channel supports that mode.
AVL
Automatic Volume Limiting (AVL) function adjusts
the sound to obtain fixed output level between
programmes (For instance, volume level of
advertisements tend to be louder than
programmes).
Press
or
button to set the AVL as On or Off.
Effect
If you are watching a mono broadcast, set
Effect on to obtain a better sound effect which
will be more stereo-like. If the current sound
system is stereo, switching this effect on will
give a more spatial effect.
Press
or
/
button to set Effect as On or Off.
Dynamic Bass
Dynamic Bass is used to increase bass effect
of the TV set.
Press
or
Use
/
High or Off. It is not recommended to select
High while listening at high volume levels.
Subwoofer
It is possible to connect an external, active
subwoofer to the TV set to give a much deeper
bass effect.
Press
Subwoofer can be set to On or Off.
Dynamic Bass is not available if Subwoofer
is set to On.
Set Subwoofer to On when you connect an
external subwoofer to the set.
English - 90 -
button to select AVL
button to select Effect. Press
button to select Dynamic Bass.
button set Dynamic bass to Low,
or
button to select Subwoofer.
VL. Press
/
Werbung
Kapitel
