Installation; Closing The Door; Height Adjustment - Küppersbusch FKG9500.0I Bedienungsanleitung

Use LED bulbs (E14 base)
only. The maximum power is
shown on the lamp unit.
CAUTION! Disconnect the plug
from the mains socket.
1. Disconnect the mains plug from the
mains socket.
2. Remove the lamp cover (refer to the
illustration).
3. Replace the used lamp with a new
lamp of the same power and
specifically designed for household
appliances. The maximum power is
shown on the lamp cover.
4. Connect the mains plug to the mains
socket.
5. Open the door. Make sure that the
lamp lights up.

INSTALLATION

WARNING! Refer to Safety
chapters.
Positioning
Install the appliance in a dry, well
ventilated indoors where the ambient
temperature corresponds to the climate
class indicated on the rating plate of the
appliance.
Cli‐ Ambient temperature
mate
class
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C

Closing the door

1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to
assembly instructions.
3. If necessary, replace the defective
door gaskets. Contact the Authorised
Service Centre.
Some functional problems
might occur for some types of
models when operating outside
of that range. The correct
operation can only be
guaranteed within the specified
temperature range. If you have
any doubts regarding where to
install the appliance, please
turn to the vendor, to our
customer service or to the
nearest Authorised Service
Centre.

Height adjustment

The height of the appliance is adjustable
from 820 to 870 mm to fine up with
existing kitchen units.
13