Operation; Switching Off; Fastfreeze Function - Küppersbusch FKG9500.0I Bedienungsanleitung

OPERATION

Freezer Control panel
1 2 3 4
1. Pilot light
2. ON/OFF switch
3. Temperature regulator (+)
4. Temperature display
5. Temperature regulator (-)
6. Alarm light
7. Alarm reset switch
8. FastFreeze light
9. FastFreeze switch
Switching on
1. Insert the plug into the wall socket.
2. Press the ON/OFF switch.
The Pilot Light will light up.

Switching off

To switch off the compartment press ON /
OFF. The Pilot light and the Temperature
display goes off.
Freezer Temperature regulation
The temperature can be adjusted between
-15°C and -24°C.
1. Press the Temperature regulators (+)
or (-), temperature flashes on display.
2. To increase the temperature press the
Temperature regulator (+).
To decrease the temperature press the
Temperature regulator (-).
The temperature display shows set
temperature for a few seconds.
5 6 7 8 9
The compartment reaches the
selected temperature within 24
hours.
High temperature alarm
In the event of abnormal temperature rise
inside the freezer (for example due to an
earlier power failure) Alarm light starts to
flash and buzzer sounds.
1. Press the Alarm reset switch to stop
the buzzer.
When the temperature returns to the
set one, the Alarm light continues to
flash for a few seconds.

FastFreeze function

You can activate the FastFreeze function
by pressing the FastFreeze switch.
TheFastFreeze light will light up.
This function stops
automatically after 52 hours.
It is possible to deactivate the
function at any time by
pressing FastFreeze switch.
The FastFreeze light will switch
off.
5