Temperature Display - Küppersbusch FKG9500.0I Bedienungsanleitung

6
Fridge Control panel
1. Pilot light
2. ON/OFF switch
3. Temperature regulator (+)

4. Temperature display

5. Temperature regulator (-)
6. IntensiveCooling light
7. IntensiveCooling switch
8. Minidac light
9. Minidac switch
Switching on
1. Insert the plug into the wall socket.
2. Press the ON/OFF switch.
The Pilot Light will light up.
Switching off
To switch off the compartment press ON /
OFF. The Pilot light and the Temperature
display goes off.
Fridge Temperature regulation
The temperature can be adjusted between
+2°C and +8°C.
1. Press the Temperature regulators (+)
or (-), temperature flashes on display.
2. To increase the temperature press the
Temperature regulator (+).
To decrease the temperature press the
Temperature regulator (-).
The temperature display shows set
temperature for a few seconds.
The compartment reaches the
selected temperature within 24
hours
IntensiveCooling function
The maximum performance is obtained by
setting the IntensiveCooling function. It's
1 2 3 4 5
recommended when loading large
quantities of food.
You can activate the IntensiveCooling
function by pressing the IntensiveCooling
switch.
The IntensiveCooling light will light up and
the fan automatically will start.
The internal temperature goes
down to +2°C.
After about 6 hours the
IntensiveCooling function
switches off automatically.
Temperature display
During normal operating the Temperature
display shows the temperature inside the
freezer / fridge.
The difference between
temperature on display and set
temperature appears when:
• selecting new setting
• the door left open for a long
time
• after placing warm food in
the compartment.
Minidac function
You can activate the function by pressing
the Minidac switch.
The Minidac light comes on and the
function is activated.
The function can start
automatically if necessary,
refer to " Minidac".
6 7 8 9