Switching The Drive On/Off; Adjusting The Assistance Level; Switching The Light On/Off; Push-Assistance - HNF-NICOLAI UD3 All-Terrain Originalbetriebsanleitung

2.3. Switching the drive on/off
A short press on the power button starts the
system.
Alternatively, the system can be switched on by
briefly pressing the power button on the battery.
2.4. Adjusting the assistance level
The assistance level is set on the Bosch control unit
on the left handlebar grip and shown in the display
(e.g. turbo).
+ increases the support
- reduces the support
2.5. switching the light on/off
The light is switched on or off by briefly pressing
the light button on the display.
With the Smartphone Hub display, the light can be
switched on or off by pressing the "+" button for a
long time or by using the app.
2.6.

Push-assistance

The push-assistance is activated by pressing the
"Walk button" and the "+" button one after the
other. The "Walk" button is located above the "+"
button.
The push-assistance helps you to push the pedelec
at a maximum of 6 km/h (in the highest gear).
In smaller gears the speed is lower.
80