Adjusting The Saddle Height - HNF-NICOLAI UD3 All-Terrain Originalbetriebsanleitung

2.2. Adjusting the saddle height
• The correct saddle height is reached when
your leg is almost straight when putting the
ball of your foot on the pedal. The crank arms
are thereby aligned vertically.
• To check the saddle height, sit on the vehicle
and lean against a wall, for example.
To change the saddle height, proceed as follows:
• Loosen the screw of the seatpost clamp with an Al-
len key until you can adjust the saddle height.
• Then retighten the screw to a torque of approx.
10-15 Nm.
The screw of the seatpost clamp is tightened enough when the seatpost
cannot be turned or when it no longer slides down into the seat tube under
your weight.
If you pull the seatpost out too far, the upper part of the seat tube may
break. There is a risk of accident or injury!
-> Pull the seatpost out only until the minimum insertion depth mark is
just visible.
79