SPORTSTECH WRX1000 Bedienungsanleitung Seite 42

Step 6
Assemble the frame support plate right (62) onto the frame using flat head inverted edge screws
(14), flat washers (13) and nylon nuts (15). Tighten the frame support plate from bottom to top right
with flat head inverted edge screws (121) and flat washers (13).
Step 7
Assemble the water tank (78) from both sides to the frame by means of L-shaped plates (23) using
flat head inverted screws (14), flat washers(13) and nylon nuts (15). Lock the water tank (78) from the
front through the L-shaped sheet (23) using flat head invert screws (12), flat washers (13) and nylon
nuts (15).
Step 8
Assemble the water tank support plate (41) from both sides to the frame using flat head invert screws
(38) and flat washers(13). The rubber strips must point upwards.
- 4PCS
42