Introduction; Device Description (Fig. 1 - 2); Scope Of Delivery - Scheppach 5906219903 Original Bedienungsanleitung

1.

Introduction

Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new tool brings you much enjoyment and
success.
Note:
In accordance with the applicable product liability laws, the
manufacturer of this device assumes no liability for dam-
age to the device or caused by the device arising from:
• Improper handling
• Failure to comply with the operating manual,
• Repairs carried out by third parties, unauthorised
specialists
• Installing and replacing non-original spare parts,
• Improper use
• Failures of the electrical system in the event of the
electrical regulations and VDE provisions 0100, DIN
57113 / VDE 0113 not being observed
Note:
Read the whole text of the operating manual before as-
sembly and commissioning.
This operating manual should help you to familiarise your-
self with your device and to use it for its intended purpose.
The operating manual includes important instructions
for safe, proper and economic operation of the device,
for avoiding danger, for minimising repair costs and
downtimes, and for increasing the reliability and ex-
tending the service life of the device.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the device in your country.
Keep the operating manual at the device, in a plastic
sleeve, protected from dirt and moisture. They must be
read and carefully observed by all operating personnel
before starting the work.
The device may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards. The required
minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.

2. Device description (Fig. 1 - 2)

1. Tank full indicator
2. Frame
3. Tank
4. Socket - 400V
5. Socket - 230V
6. Earthing screw
7. Transport handle
8. Battery
9. Overload switch
10. Voltmeter
11. Connection - 12V
12. Oil dipstick
13. Transport wheels
14. Engine switch
15. Air filter
16. Reverse starter
17. Engine
18. Fuel tap
19. Choke
20. Tank cover

3. Scope of delivery

A. Transport wheels
B. Support foot
C. Adapter - 400V
D. Adapter - 230V
E. Spark plug wrench
F. Hexagonal bolt (M6 x 12)
G. Hexagonal bolt (M8 x 20)
H. Hexagonal bolt (M8 x 40)
I. Wheel axle
J. Transport handles
K. Hexagonal nut (M12 )
L. Hexagonal nut, self-locking (M8)
M. Locking nut (M6 )
N. Locking nut (M6)
O. Spring washer (2x)
P. Washer (2x)
Q. Washer, plastic (4x)
R. Operating manual
S. Battery 14V / 17Ah
www.scheppach.com GB | 21