Stiga SILEX 103 B Bedienungsanleitung Seite 13

Index
Introduction
Conditions of use
Safety norms
Safety device
Assembly
Adjustments
Control system
Operating Instructions
Garaging & scheduled
maintenance
Noise level
Accessories
Fault
INTRODUCTION
Dear Customer,
thank you for the confidence in purchasing our product .We hope you will spend many enjoyable hours using it.
The present instructions are issued to ensure a right and correct use of the product : for this reason we beg
you to carefully follow such working and safety instructions so that the machine could operate with complete
satisfaction and have a long service life.
To guarantee what above it is necessary to fit the machine with original components/spare parts.
The user/operator forfeits any claims which may arise if the machine is fitted with components other
than original spare parts.
Subject to changes in design and construction without notice.
In order to process customers' technical information and spare parts orders, please always state the
machine serial number you can see printed on the label placed on the machine left side ( fig. 1).
CONDITIONS AND LIMITATIONS OF USE
The motor- cultivator is designed and built to hoe the land. The motor- cultivator must only be used with original
equipment and spares. Any use other than those here described is prohibited and will involve, in addition to
cancellation of the warranty, serious risk for the operator and bystanders.
SAFETY PRECAUTIONS & ACCIDENT PREVENTION MEASURES.
Both on the machine body and in the present instructions booklet can be found indications
and notices linked to the a.m. symbol: in such cases please be careful because you can face
potential danger so it is recommended to use a special caution both for operator's own sake
and bystanders'.
WARNING! Before assembly and putting the machine into operation , please read carefully the operating
instructions. Persons not familiar with such instructions are not authorized to use the machine.
1 Persons under 16 should not be allowed to use the machine.
2 When operating the machine, the user should ensure that no others, particularly children, are
standing in the area. Please, remember that you are responsible for the safe operating of your machine
vis-a-vis third persons.
3 Before starting to mill, remove any foreign bodies from the soil.
4 Do not start the machine if standing in front of the rotary cutter, neither get near the machine when
working. If pulling the starter short rope, the rotary cutter and the machine have to standstill.
5 During working operations, for protection purposes, it is recommended to wear technical/strong shoes
and long trousers. Be careful, because when machine is operating the danger to be wounded in the
toes or feet is really high.
Original instructions
6