Blumfeldt Flagranti Bedienungsanleitung Seite 30

EN
30
Step 2: First connect the gas hose (B) by hand to the gas connection (A) of the
appliance. Fasten the connection between A and B securely with a size 13 mm
spanner and another size 17 mm spanner.
Step 3: Refit the heat-resistant plate (C) with 3 screws.
Please note:
• A certified gas hose (EN 16436-1) and a gas regulator (EN16129) are
included.
• Worn or damaged hoses must be replaced immediately.
• The gas appliance may only be put into operation after it has been
connected and a leak test has been carried out!
• Only use certified spare parts.
• Replace the old gas hoses with new gas hoses when national regulations
or the service life of the hose require it (recommended: every 2 years).