EN
34
Required Tools
•
Philip Screwdriver
•
Adjustable Spanners
•
Wrenches
Before assembly, open the Door (#9) and take out all inside parts from Burner
& tank housing assembly (#8), then close the Door (#9).
Step 1:
Install the 4pcs Glass window bracket
B (#6) onto the Burner & tank housing
assembly (#8) by using 4pcs M5x12
screws (#10).
Note: The bigger screw hole must be
downward. The right-angle of bracket
B and tank housing assembly must be
paralleled.
Step 2:
Install the 4pcs lower of Glass
window bracket A (#5) onto the
Glass window bracket B (#6) by
using 16pcs M5x6 screws (#11).