Einstellpunkte Für 3-Wege-Übergang - JVC KD-X362BT Bedienungsanleitung

AUDIOEINSTELLUNGEN
[ SUBWOOFER [ SW LPF FRQ]
LPF]
* 2* 3
[ SW LPF SLOPE]
[ SW LPF PHASE]
[ SW LPF GAIN]
Einstellpunkte für 3-Wege-Übergang
[ SPEAKER SIZE]
[ TWEETER] [ SMALL] [ MIDDLE] [ LARGE]
/ /
[ MID RANGE] [ 8CM] [ 10CM] [ 12CM]
/ /
[ 6× 8] [ 6× 9]
/
[ WOOFER] [ 16CM] [ 20CM] [ 25CM]
* 3 / /
[ X ' OVER]
[ TWEETER] [ HPF FRQ] [ 1KHZ]
[ 8KHZ]
[ SLOPE] [ – 06DB]
[ PHASE] [ REVERSE]
[GAIN] [ – 08DB]
24 DEUTSCH
[ 30HZ] [ 40HZ] [ 50HZ] [ 60HZ] [ 70HZ]
/ / / /
[ 90HZ] [ 100HZ] [ 120HZ] [ 150HZ] [ 180HZ]
/ / / /
[ 220HZ] [ 250HZ] [ THROUGH]
/ /
[ – 06DB] [ – 12DB] [ – 18DB] [ – 24DB]
/ / /
[ REVERSE] [ NORMAL]
(180°)/ (0°)
[ – 08DB] [ 00DB]
bis
[ 13CM] [ 16CM] [ 17CM] [ 18CM] [ 4× 6]
/ / / / /
[ 30CM] [ 38CM OVER] [ NONE]
/ / / (nicht angeschlossen)
[ 1.6KHZ] [ 2.5KHZ] [ 4KHZ] [ 5KHZ] [ 6.3KHZ]
/ / / / /
[ 10KHZ] [ 12.5KHZ]
/ /
[ – 12DB]
/
[ NORMAL]
(180°)/ (0°)
[ 00DB]
bis
[ 80HZ] [ MID RANGE] [ HPF FRQ]
/ /
/
[ HPF SLOPE]
[ LPF FRQ]
[ LPF SLOPE]
[ PHASE]
[GAIN]
[ WOOFER] [ LPF FRQ]
* 3
[ 5× 7]
/ /
[ SLOPE]
[ PHASE]
[GAIN]
/
* 1 Wird nur angezeigt, w enn
(Seite 22)
* 2 Wird nur angezeigt, w enn
(Seite 22)
* 3 Wird nur angezeigt, w enn
[ 30HZ] [ 40HZ] [ 50HZ] [ 60HZ] [ 70HZ]
/ / / /
[ 100HZ] [ 120HZ] [ 150HZ] [ 180HZ]
/ / /
[ THROUGH]
[ – 06DB] [ – 12DB]
/
[ 1KHZ] [ 1.6KHZ] [ 2.5KHZ] [ 4KHZ]
/ / /
[ 8KHZ] [ 10KHZ] [ 12.5KHZ] [ THROUGH]
/ / /
[ – 06DB] [ – 12DB]
/
[ REVERSE] [ NORMAL]
(180°)/ (0°)
[ – 08DB] [ 00DB]
bis
[ 30HZ] [ 40HZ] [ 50HZ] [ 60HZ] [ 70HZ]
/ / / /
[ 100HZ] [ 120HZ] [ 150HZ] [ 180HZ]
/ / /
[ THROUGH]
[ – 06DB] [ – 12DB]
/
[ REVERSE] [ NORMAL]
(180°)/ (0°)
[ – 08DB] [ 00DB]
bis
[ SPK/ PRE OUT] [ REAR/ REAR] [ REAR/ SUB.W]
auf oder
[ SPK/ PRE OUT] [ REAR/ SUB.W]
auf oder
[ SUBWOOFER SET] [ON]
auf gestellt ist. (Seite 20)
[ 80HZ] [ 90HZ]
/ / /
[ 220HZ] [ 250HZ]
/ / /
[ 5KHZ] [ 6.3KHZ]
/ / /
[ 80HZ] [ 90HZ]
/ / /
[ 220HZ] [ 250HZ]
/ / /
gestellt ist.
[ SUB.W/ SUB.W]
gestellt ist.