SUPAIR ACRO4 Betriebshandbuch Seite 66

Harness User's Manual | ACRO4
The harness you have just purchased has a AIRBAG type shock absorber.
This protection is intended to protect you against potential impacts. It complies with EU Regulations 2016/425 relating to personal protective equip-
ment (PPE) and certified by expert following protocol SP-002 12/2016.
The shock absorber UE conformity of your harness is certified by the following laboratory: ALIENOR CERTIFICATION n ° 2754, Z.A. du Sanital, 21 Rue
Albert Einstein, 86100 Chatellerault, FRANCE
The storage, transport and maintenance of the AIRBAG is the same as it is for the harness. The inspection of the protector is the same as it would be
for the harness.
Please note that no shock absorber can guarantee total protection against injury. The back protector does not prevent potential injuries to
the spine and/or pelvis. In addition, only the parts of the body covered by the shock absorber are likely to benefit from adaquate protection
against possible impacts.
Please note that the performance of the equipment can be dangerously affected by any mod-
ification made or improper use of the shock absorber, and negatively affect the proper func-
tionality of the protector which must be whole and properly installed. You must check that all
is in order prior each flight:
1 / The correct shape and inflation of the AIRBAG/shock absorber.
2 / The AIRBAG seams and overall condition of the fabrics - look for holes, tears, snags ....
The protection can have a five (5) year lifespan under normal use conditions.
Warning! Following a major hard landing would justify the protector to be discarded.
If your AIRBAG is damaged, have it inspected and repaired at a professional qualified facility or contact us at sav@supair.com
The test results and the EU declaration of conformity can be found at: www.supair.com
BUMPAIR Shock Absorber
Label meaning:
Conform to the EPI requirements.
SUPAIR | ACRO4 | page 32