Front Protection - SUPAIR ACRO4 Betriebshandbuch

Harness User's Manual | ACRO4
Front/ventral protection
Protection kit.
For better explanations in the fol-
lowing schematic, the protections
were colored in blue.
A
B
Installing part « A »
Part « A » is attached to the chest strap,
and left side of the pilot.
1 Push the female buckle through the elas-
ticated loop.
2 Wrap and close the Velcro® around the
horizontal strap between the main left
attachment location and the shoulder strap.
Installing part « B »
Part « B » is attached to the chest strap, and
right side of the pilot.
3 Wrap and close the Velcro® around the
horizontal strap on the pilot's right side,
behind the main attachment location.
4 Wrap and close the Velcro® around the
horizontal strap between the right shoulder
strap and the ABS strap.
Côté droit du pilote
1
2
Elastic
Velcro®
4
3
D. Velcro®
C. Velcro®
Accessories assembly
Closing the ventral ( chest strap ) strap
- Closing the buckles.
- Slide the part «B» excess in the elasticated loop found behind part
«A» to tidy everything up. As such, the protection will adapt itself to
the chest strap.
( From the pilot's view point )
Côté gauche du pilote
SUPAIR | ACRO4 | page 12