Rls 45 K Service Menu - Maico PPB 30 O Montageanleitung

9 Commissioning
* The service menu items are set according to the 3-digit binary code 111, e.g. the adjuster "5" is dis-
played as 101 → Upper and lower LEDs light up.

9.3 RLS 45 K service menu

Bold Factory settings
LED flashes quickly
LEDs
ModBus settings
ModBus address
Parameters
Device type on RLS
(Fan1/Fan2)
Number of device pairs/
devices on RLS (Fan1/
Fan2)
1 RS 485 inactive ModBus act-
2 ive 9600 Baud
3 ModBus active 19200 Baud
This adjuster activates the
ModBus and sets the baud
rate. Notice: When the Mod-
bus interface is active, ex-
ternal sensors/LTs/RLS can-
not be connected.
1 Address 10
2 Address 11
3 Address 12
4 Address 13
5 Address 14
6 Address 15
7 Address 16
This adjuster selects the Mod-
Bus address.
LED flashes slowly
Set value / Setting /
ventilation level description
1 PP 45
2 PPB 30 O
Here, the type family, which is
connected to the Fan1/Fan2
interface, is selected.
Notice: Only single-type
PP 45 or PPB 30 unit combin-
ations are permitted at the fan
interface!
1 1 PP 45 or 1 PPB 30 unit pair
2 2 PP 45 or 2 PPB 30 unit
3 pairs or
4 3 PP 45 or 3 PPB 30 unit
5 pairs
Odd number 3 PP 45 units
Odd number 5 PP 45 units
The number of units connec-
ted to the fan interface (Fan1/
Fan2) is selected here. No-
tice: Release/number of
45