Maico PPB 30 O Montageanleitung Seite 50

9 Commissioning
LED flashes quickly
PPB 30 RC LEDs
The blue oper-
ating mode
LED flashes
1x per cycle
The blue oper-
ating mode
LED flashes
2x per cycle
The blue oper-
ating mode
LED flashes
3x per cycle
The blue oper-
ating mode
LED flashes
4x per cycle
50
Parameters Set value Setting / description
Duration of 1
intermittent 2
ventilation/ 3
ventilation level
Sleep function 1
2
3
Filter runtime 1
2
3
4
Single-room 1
ventilation unit 2
LED flashes slowly
5 minutes (red LED 1x)
10 minutes (red LED 2x)
30 minutes (red LED 3x)
Parameters for the duration of the manual de-
humidification function (level 5) and the dura-
tion of the ventilation level when overriding de-
mand-driven operation are set here (factory
setting 10 minutes).
30 minutes (red LED 1x)
60 minutes (red LED 2x)
90 minutes (red LED 3x)
The duration of the sleep function (level 0) is
parameterised here
(factory setting 60 minutes).
2 months (red LED 1x)
3 months (red LED 2x)
6 months (red LED 3x)
Reset filter runtime (red LED 4x)
.The filter runtime is parameterised here (fact-
ory setting 6 months).
Operation in pairs (red LED 1x)
single-room ventilation unit (red LED 2x)
If there are reception problems with the slave
or master device, the PPB 30 RC unit can be
enabled as a single-room ventilation unit.