Troubleshooting - VOLTCRAFT VC151 Bedienungsanleitung

14. Troubleshooting

Problem
The DMM will not
power up.
Cannot measure
changes in value.
No measurement
possible in the
A measurement
range
No measurement
possible in the
mA/µA measure-
ment range
Possbile cause
Flat battery
Is the wrong measuring func-
tion activated (AC/DC)?
Are the incorrect leads used?
Is the HOLD function
activated?
Is the fuse of the A measuring
range defective?
Is the fuse of the mA/
µA measurement range
defective?
Suggested solution
Replace with new battery.
Check display (AC/DC) and switch
the function if required.
Check the terminal assignment or
connection of the probe leads.
Deactivate the HOLD function.
Check the 10 A F2 fuse
Check the 0.4 A F1 fuse.
53