SUPAIR FLUID LIGHT Betriebshandbuch Seite 76

Notice d'utilisation parachute | FLUIDLIGHT
3. Laying out the panels (continued).
d. Follow the leading edge to find the fourth panel.
This panel is white and it's an angle panel . It should be laid out flat in two motions: in a W-shape using the fold mark.
Excess
fabric
storage.
e. Follow the leading edge to find
the fifth panel.
This panel is white and laid out
flat in one motion in a rectangu-
lar shape using the fold mark.
>> Once the first side is folded, continue by repeating steps «a» to «h» in order to fold the other three sides in the same manner.
f. Follow the leading edge to find
the sixth panel.
This panel is white and laid out
flat in one motion in a rectangu-
lar shape using the fold mark.
Packing tandem reserve
g. Follow the leading edge to find
the seventh panel.
This panel is white and laid out
flat in one motion in a rectangu-
lar shape using the fold mark.
When folding the corner
panels, pay attention to the
excess fabric which must be
tucked away flat inside the
panel.
h. Follow the leading edge to find
the eighth panel.
This panel is white and laid out
flat in one motion in a rectangu-
lar shape using the fold mark.
.
Flattening resreve :
SUPAIR | FLUIDLIGHT | page 31