English
32
Cleaning the cyclone
Cleaning the filter
1 Turn the cyclone clockwise (1) and remove it from the dust bucket (2).
2 Remove hair and dirt that is stuck in and under the cyclone.
3 Replace the cyclone (1) and turn it counterclockwise (2) to secure it back into
the dust bucket.
Caution: Make sure to fully tighten the cyclone when placing it back.
Rotate the cyclone until the cyclone cannot rotate any further and is fully
secured.
When the filter needs to be cleaned, the filter cleaning icon appears on the
screen.
1 Pull the filter case off the dust bucket.