Cleaning The Filter Unit - Philips FC6141 Bedienungsanleitung

Cleaning the filter unit

Make sure you clean the filter unit regularly.
1 Turn the outer filter anticlockwise (1) and remove it from the filter
holder (2) (Fig. 11).
Leave the inner filter attached to the filter holder.
2 Clean the inner filter and the outer filter with a brush or with a
normal vacuum cleaner if they are very dirty.
Note: If necessary , you can clean the inner filter and the outer filter in cold
or lukewarm water. Dry the inner and outer filter thoroughly before you use
the filter unit again.
3 Place the outer filter back onto the filter holder (1) and turn it
clockwise to attach it (2). Put the filter unit back into the dust
compartment. (Fig. 12)
Storage
1 You can store the vacuum cleaner and the accessories in the
storage bag. (Fig. 13)
Replacement
We advise you to replace the inner filter after a prolonged period of use
or if you can no longer clean it properly.
Replacing the inner filter
1 Remove the filter unit from the dust compartment. Turn the outer
filter anticlockwise (1) and remove it from the filter holder
(2). (Fig. 14)
2 Gently turn the inner filter anticlockwise (1) and remove it from
the filter holder (2). Place a new inner filter on the filter holder (1)
and turn it clockwise to attach it (2). (Fig. 15)
3 Push the tip of the inner filter inwards. Place the outer filter on the
filter holder (1) and turn it clockwise to attach it (2). (Fig. 16)
4 Put the filter unit back into the dust compartment (Fig. 17).
ENGLISH
9