Philips AquaTrio Cordless 9000-Serie Bedienungsanleitung Seite 45

Problem
The appliance has a lower
suction power than usual.
Dust escapes from the
appliance.
Dust escapes when opening
the dust bucket.
The filter cleaning icon is
shown on the display and
the device shuts down.
The appliance does not
move smoothly across the
floor when I am cleaning a
carpet.
The roller brush does not
turn anymore.
Possible cause
The filter and/or the cyclone
are dirty.
Something is blocking the
cyclone.
The suction channel behind the
roller brush is clogged.
You have not attached the
filter case properly to the dust
bucket or you have not
attached the dust bucket
properly to the appliance. In
both cases, there will be a loss
of suction power.
The brush is clogged with hair
or dirt.
The foam filter is not present in
the filter case, or the top cover
is missing.
This is normal behavior due to
underpressure.
The filter may be dirty.
You selected a too high suction
power.
The roller brush is clogged with
hair or dirt.
The roller brush may stop
turning when it encounters too
much resistance from high-pile
carpet.
Solution
Empty the dust bucket. Clean the filter and
the cyclone. Make sure that you remove
any hair and dirt that is stuck in the cyclone.
You can remove the cyclone for easy
maintenance (see 'Cleaning the cyclone').
Make sure that you wash the filter at least
once a month if you use the appliance
regularly (see 'Cleaning the filter').
Check the cyclone for objects stuck in it and
remove any object that is blocking the
cyclone. Make sure that you remove any
hair and dirt that is stuck in the cyclone (see
'Cleaning the cyclone').
Remove the roller brush and check the
suction channel for obstacles and remove
them.
Make sure that you attach the filter case to
the dust bucket and the dust bucket to the
appliance properly (see 'Cleaning the dust
bucket ').
Switch the appliance off and clean the
roller brush with a pair of scissors or by
hand (see 'Cleaning the roller brush').
Make sure that the filter is in the appliance
and assembled correctly (see 'Cleaning the
filter').
If possible, open the appliance outside.
We advise you to clean the filter. If you
cleaned the filter recently, you can
disregard this icon. To continue vacuuming,
click the arrow icon.
Reduce the suction power by choosing
setting 1 or move more slowly over the
carpet.
Clean the roller brush with a pair of scissors
or by hand (see 'Cleaning the roller brush').
Switch off the appliance and then switch it
back on again.
English
47