Philips AquaTrio Cordless 9000-Serie Bedienungsanleitung Seite 36

English
38
Information code
Icons
Cause
The LED nozzle is stuck. This is a
safety cut-off if something is
stuck in the nozzle (for
instance, a power cable or a
toy).
The air inlet openings are
blocked.
Unplug for use.
The wrong charger is
connected.
Solution
Check the roller brush and the rest of the
nozzle for hair or other obstacles and
remove them (see 'Cleaning the roller
brush'). If there are no obstacles, switching
the appliance off and on might solve the
problem.
Check the air inlet openings for blockages
and remove them. If this does not solve the
problem, check the whole air passage for
blockages and remove them. For the
Vacuum only set-up, this refers to the
nozzle, tube, filter, vortex finder, long
crevice tool, and Mini turbo brush. For the
Vacuum & Mop set-up, this refers to the
nozzle, tube, and the wet filter.
Unplug the appliance for use. Otherwise, it
will not switch on. Only during AUTOCLEAN
is it possible to have the appliance plugged
in.
Only charge the appliance with the adapter
supplied. Only use 34V adapter
S036-1A340100HE. The corresponding
adapter number can be found on the
adapter.
Meaning
AUTOCLEAN