Active Protection System; Usage Restrictions - Philips AquaTrio Cordless 9000-Serie Bedienungsanleitung

English
14

Active protection system

Tips and other important information

Usage restrictions

10 Use the buttons on the left
different power settings.
Note: By pressing the left
in normal mode and by pressing the right
for cleaning extra stubborn stains.
-
This appliance is equipped with an active protection system. This active
protection system has been designed to recognize when a foreign object
other than dirt or liquid is picked up from the floor.
-
When the system is activated, the appliance switches off and the i3 message
appears on the display (see 'Display icons and their meaning'). The active
protection system can also be activated when the microfiber brushes are too
wet, when you move the appliance over a carpet or a rug, or when you move
it over flooring that is not properly affixed.
-
It is not necessary to vacuum the floor before mopping, as the Vacuum &
Mop set-up actively wet-cleans your hard floor to capture all kinds of dirt,
including liquids and stains. On carpets and rugs, use the Vacuum only set-up.
-
If your hard floors do not need mopping, simply use the vacuum only set-up
which features LED lights and PowerCyclone 12 technology for precise and
powerful dirt pick-up.
-
You can move the appliance just as quickly as a vacuum cleaner. To remove
difficult stains, click the right
move the appliance slowly over the stains.
-
It is recommended to leave the appliance on when pulling it over a threshold
or carpet. This will prevent dirty water from dripping out of the AquaSpin
nozzle.
-
The appliance can leave a small puddle of water on the floor if you do not
move the appliance while switching it off. You can reduce the size of the
puddle by moving the appliance while switching it off. If needed, you can
remove the last drops with a cloth.
-
After you switch off the appliance, move it forwards and backwards a few
times to remove the liquid that is present between the two microfiber
brushes. If you fail to do this, the appliance leaves a trace of water on the
floor when you lift it up.
-
The Vacuum & Mop set-up is suitable for vacuuming and mopping all types of
hard floors, except uncoated wooden floors.
-
The Vacuum & Mop set-up is intended for regular cleaning of hard floors.
Always follow the cleaning instructions for your hard floor when you use this
appliance.
and right to choose between the two
button you can use the appliance for cleaning
button you can use the appliance
button to activate the 2
nd
power setting and