Cleaning The Motor Protection Filter - Philips FC9269 Bedienungsanleitung

English
16
11 Put the filter cylinder back into the filter cylinder case (1) and turn it
clockwise to fix it (2) ('click').
Make sure that the filter cylinder case is dry before you reinsert the
filter cylinder into it.
12 Put the filter cylinder unit back into the dust bucket ('click').
Make sure that the dust bucket is dry before you reinsert the filter
cylinder unit.

Cleaning the motor protection filter

Clean the permanent motor protection filter every two months.
1 Unplug the appliance.
2 Take the motor protection filter out of the appliance and clean the
filter by tapping the dust out of it over a dustbin.
If you want to clean the motor protection filter more thoroughly, you can
rinse it under a cold tap.
Do not use washing-up liquid, flammable substances or any other
cleaning agent to clean the motor protection filter.
Make sure that the motor protection filter is completely dry before you
put it back into the filter compartment.
3 Press the clean filter firmly back into the filter compartment to
ensure that it is properly placed.
Washable ultra Clean air hEpa 13 filter
Note: To guarantee optimal dust retention and performance of the vacuum
cleaner, always replace the HEPA filter with an original Philips filter of the
correct type (see chapter 'Ordering accessories and filters').
Clean the washable HEPA 13 filter every 6 months. You can clean the
washable HEPA 13 filter max. 4 times. Replace the filter after it has been
cleaned 4 times.
Note: Do not clean the HEPA 13 filter in the washing machine, but follow the
procedure below.
1 Unplug the appliance.