Cleaning The Roller Brush - Philips AquaTrio Cordless 9000-Serie Bedienungsanleitung

Cleaning the roller brush

Caution: Make sure that the filter case including the foam filter are
completely dry before you put them back into the dust bucket.
10 Reconnect the 3-in-1 handheld to the dust bucket.
Caution: Do not reconnect the 3-in-1 handheld to the dust bucket
without the filter case being inserted in the dust bucket.
Note: Replace the filter every 6 months to ensure maximum performance.
Replacement filters are available under part number XV1791 (see
'Replacement').
1 Pull down the locking lever on the side of the LED nozzle (1) and slide the
roller brush out of the LED nozzle (2). You can remove entangled hair or
threads from the roller brush by sliding down the roller brush with one hand.
Tip: You can also move one blade of a pair of scissors through the groove
on the roller brush to cut hairs and threads that have become entangled
around the roller brush.
2 Slide the roller brush back into the LED nozzle (1) and push up the locking
lever to lock the roller brush in the LED nozzle ('click').
English
35