RUSTA 156500080101 Gebrauchsanweisung Seite 9

Re-assembly of the outer valve assembly back into the inner
Picture 9
valve seat by reversing the removal procedure. Make sure you
do not cross-thread the valve assembly and only use your hands
to re-fit the outer valve to the inner valve seat.
Once fully inserted and screwed in, then and only then, use
Picture 10
the valve sealing tool for a final tighter turn. Be sure not to
over tighten the assembly as this will damage the valve and
its ability to hold air pressure.
9
IM_156500080101_Inflatable_standup_paddle_board_v1.indd 9 2021-10-05 13:55