Factory Reset - Therabody RecoveryAir PRO Bedienungsanleitung

EN Superior, hygienic design
The RecoveryAir PRO compression boots have non-porous medical grade material that helps prevent bacteria buildup and provides a resistant surface. Our internal
overlapping chambers provide a smooth surface to clean, which means no wiping under chamber flaps where bacteria can build up. This also means no smells.
How to Clean
Here are simple steps to cleaning your RecoveryAir PRO compression boots:
1. Unzip the boots completely and lay them on a flat surface.
2. Take a disinfectant wipe or spray, and gently clean the inside of the boots. Avoid any oil based cleaning product.
3. Once you have cleaned your garment, make sure to fully dry the surface by hanging them up or wiping them down.
4. We also recommend you wipe down the exterior of the pump to reduce surface contaminants.
What it is and why it's important:
We use medical-grade material covering the internal chamber to help reduce the potential for microbial growth and moisture retention. Whether you are an
individual, or a clinic, our boots are designed to help limit the potential for bacterial transmission.
Traveling with your RecoveryAir PRO Compression System
When traveling with your RecoveryAir PRO Compression System, we recommend:
• ● R oll the hose tightly and slide it into the foot section of your garment. It is important to keep the hose from creasing to protect the hose's integrity and its ability to
properly distribute airflow.
• Once you secure the hose, simply fold your garment to fit into your travel bag or carry-on luggage.
• Secure your pump in the provided carrying pouch.
Charging the RecoveryAir PRO
1. After turning off the pump, plug the power adapter into the charging port of the RecoveryAir PRO pump.
2. You can continue to use the RecoveryAir PRO while charging.
3. Charging is complete when all 3 LED lights of the LED battery indicator are lit.
Lock & unlock feature:
1. To lock or unlock the pump, press and hold the select and up arrow at the same time.
2. You will then see a padlock icon appear on the main screen.

Factory reset

You can perform a factory reset to change all customized programs back to the original default setting by
following this easy step:
1. Press and hold the select and play/stop buttons.
7
Select Button Start/Pause/
Stop Button