Technical Data - Scheppach DS920X Original Bedienungsanleitung

Additional safety notes
a) Connect a vacuum cleaner to the supplied adapter
before starting your operations.
b) Attention! Keep away grinding dust from open fire.
Dust may be explosive.
c) Always wear goggles and a dust mask when
grinding, in particular during overhead work and
when processing critical materials! When grinding
certain materials (e.g. lead paint, certain types
of wood and metal) harmful or noxious dust may
be generated. Touching or breathing in such dust
may imply risks for the operator or people in the
vicinity.
Notes regarding vibration and noise emissions
Reduce noise emissions and vibrations to a minimum!
1. Only use power tools which are free of defects.
2. Maintain and clean the power tool on a regular
basis.
3. Adjust your way of working to the power tool.
4. Do not overload your power tool.
5. Have your power tool inspected, if necessary.
6. Switch off the power tool when it is not in use.
Remaining risks
Even if you use this power tool in compliance with the
regulations, there are still remaining risks. The follow-
ing risks may occur due to the type and design of the
power tool:
a) Damage caused to your health resulting from
hand/arm vibrations if the power tool is used over
a Ionger period of time or if it is not properly used
and maintained.
b) lnjury and damage to property caused by flying off
insertion tools which are unexpectedly expelled
from the power tool due to sudden damage, wear
or incorrect insertion.
c) Burns and cuts if the insertion tools are touched
directly after use and/or with your bare hands.
Warning! This electric tool generates an electromag-
netic field du ring operation which may impair active or
passive medical implants under certain circumstanc-
es. ln order to reduce the risk of severe or Iethal inju-
ry, we recommend that persons with medical implants
consult their doctor and the manufacturer of the medi-
cal implant before using the power tool.

6. Technical Data

Nominal voltage:
Nominal frequency:
Power consumption:
Nominal speed (oscillation
rate) n:
Spindle size:
Abrasive paper diameter:
Protection class:
Weight:
Sound level
Sound pressure Ievel L
Sound power Ievel L
Uncertainty K
Hand-arm vibration
When grinding with abrasive
sheets a
Uncertainty K:
The specified hand-arm vibration value is based on
grinding with an abrasive sheet. Different applications
may result in different values.
The noise and vibration values were determined ac-
cording to EN 60745-1 and EN 60745-2-3.
The specified vibration value was measured an the
basis of a standard test method and can be used to
compare any kind of power tools.
The specified vibration value can also be used for the
initial evaluation of exposure.
Warning! Depending on how you use the power tool,
the actual vibration values may deviate from the spec-
ified values!
Take measures to protect yourself against vibrations!
Make sure to take into account the entire work pro-
cess, i.e. also times when the power tool is operated
without Ioad or switched off! Appropriate measures
include the regular maintenance and care of the power
tool and its attachments, keeping your hands warm,
regular breaks and well planned work processes!
www.scheppach.com
.:
PA
.:
WA
h
220-240 V~
50 Hz
710 W
800 - 1800 1/min
M14
225 mm
II
4,9 kg
94,2 dB(A)
105,2 dB(A)
3 dB(A)
5,848 m/s
2
1,5 m/s
2
GB | 25