Figure 5:
ASSEMBLY THE COMPUTER
Remove the nut (H1) from the back side of computer(H). Connect the sensor wires(R3 & F1) with
computer wires and put the computer on the computer housing Then secure the computer on the
computer housing by screw(H1).
Figure 5:
ASSEMBLY THE COMPUTER
Remove the nut (H1) from the back side of computer(H). Connect the sensor wires(R3 & F1) with
computer wires and put the computer on the computer housing Then secure the computer on the
computer housing by screw(H1).
TOOL
46
T1
N2
T4
N3
T2
T4
T3
T5
T6
N3
T3
T4
TOOL
T2
N2
T4