AsViva H21 Benutzerhandbuch Seite 45

ASSEMBLY
Figure 3:
ASSEMBLY FOR CENTRAL SUPPORT TUBE
STEP 1.Take of the bolt( A1), from the main frame(A) before assembly.
STEP 2.Connect the sensor wire(N1) and the computer cable(N2).
STEP 3.Assembly support tube(F) with the main frame(A) by bolts(A1).
ATTENTION:TAKE CARE WHEN PUSHING THE TUBES TOGETHER THAT CABLES AND WIRES
ARE NOT PINCHED.
TOOL
Figure 4:
ASSEMBLY FOR HANDLE BAR
Put the handle bar(E1&E2) into the handle bar housing and secure it by screw(W5&W6)
Be careful not to pinch the wires while assembling.
TOOL
6mm
N2
A1
W5
TOOL
6mm
F
N1
E2
W6
W5
W6
W5 W6
A
E1
W6
W5
45