lamber DSP1 Installation Bedienung Seite 18

First Section - FOR THE USER
WORKING AND USE
The machine protection degree is IP21, therefore it should not be washed with direct high pressure jet water;
The objects to be washed should be correctly arranged for a good washing-up result;
We suggest to descale dishes, from time to time, in order to remove calcareous and/or starchy sediments
by soaking it in suitable solutions suggested by your cleansing agent supplier.
If you need to buy new dishes remember the following: Dishes and cups: preference must be given to
china or non-porous pottery articles, with smooth surface. Glasses: choose a glass suitable to be washed
in dish-washing machines. Surfaces must be smooth and bottoms the least concave possible.
OPERATION BEFORE WORKING
B
EFORE STARTING THE WORKING OPERATION BE
:
SURE THAT
- the cock is open;
- the filters and
their housings;
- the wash arm and the rinse arm are
pivot;
- brightener and washing powder dispenser
containers are loaded.
- Make sure the front door is closed (as regards
DSP5 model, make sure the hood is completely
down).
- Be sure that the outer general feeding switch is
off.
CAUTION: Observe the safety notes and
dosage data for the use of chemicals. During
the use of the chemical substance wear
protective clothing, gloves and protective
glasses. Do not
products.
the overflow are in
free to
mix different cleaning
T :
HEN PROCEED
1
- Turn the machine on by using the wall
switch and push the switch "A" on the control
panel (DIS.1). The green lamp "G" lights up and
the machine loads automatically (with closed
Door) (The lamp "F" is flashing
Please pay attention to the opening and
closing of the door of the Dish/Glass-washers.
Do not use the machine if you are wearing
clothes/items that could get entangles in the
dishwasher parts. As they can limit personnel's
regular moving ability!
Once the loading has been completed, the green
lamp "F" is flashing slowly : it indicates that the
machine is ready to start the washing cycle.
2
- If you put it in by hand, pour the detergent
onto the pump suction filter in the tank
(ask the detergent supplier for measuring!).
If the machine is provided with automatic devices
for measuring the additional liquid detergent,
check that there is product in the containers.
18
ENGLISH
.
quickly)