Specifications - Sony UP-D2550S Gebrauchsanweisung

Specifications

Power requirements
220 to 240 V AC, 50/60 Hz
Power consumption
About 1.0 A max. at 25°C, 240 V AC
Operating temperature
5°C to 35°C (41°F to 95°F)
Operating humidity
20 % to 80 % (no condensation allowed)
Storage and transport temperature
–20°C to 60°C (–4°F to 140°F)
Storage and transport humidity
20 % to 90 % (no condensation allowed)
Dimensions
About 370 × 125 × 417 mm (w/h/d)
× 5 ×16
5
(14 ⁄
8
Mass About 9.5 kg (20 lb 15 oz)
Printing system
Sublimation heat transfer printing
Picture Memory
4 Mbytes
Picture element
Maximum 1365 × 1024 dots (310 dpi)
Thermal head
12.2 dots/mm (1024 dots)
Total gradation
256 levels each for yellow, magenta, and
cyan
Digital interface
SCSI 1 channel
Half-pitch 50-pin connector × 2
Input: Max. 5 V DC
Output: Max. 5 V DC
Printing time
Approximately 50 seconds
(for color printing, excluding the data
transmission time)
Approximately 100 seconds
(for Self-laminating color printing,
excluding the data transmission time)
Protection against electric shock:
Class I
Protection against harmful ingress of water:
Ordinary
Degree of safety in the presence of flammable
anesthetics or oxygen:
Not suitable for use in the presence of
flammable anesthetics or oxygen
Mode of operation:
Continuous
3
⁄ inches)
4
Supplied accessories
Paper tray (1)
AC power cord (1)
Paper cover (1)
Color printing pack (1)
CD-ROM a) (1)
Roller Cleaning kit (1)
Software license agreement (1)
Instructions for Use (1)
a) Contains data for the instruction
manual for the printer driver
Optional accessories
Color printing pack UPC-2010
Self-laminating color printing pack
UPC-2040A
Self-adhesive color printing pack
UPC-20S01
16-split Self-adhesive Pre-cut color
printing pack UPC-20S16
4-split Self-adhesive Pre-cut color
printing pack UPC-20S04
Color Postcard printing pack
UPC-2070E
B/W printing pack UPC-2020
UPA-2001 paper ejector
UPA-2002 paper tray
Design and specifications are subject to change
without notice.
23
Others