Specifications - Sony UP-D55 Vor Verwendung

Specifications

Power requirements
100 to 120 V AC, 50/60 Hz
(for 100 to 120 V AC users)
220 to 240 V AC, 50/60 Hz
(for 220 to 240 V AC users)
Input Current 2.8 A max. at 25 °C
(for 100 to 120 V AC users)
1.2 A max. at 25 °C
(for 220 to 240 V AC users)
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Operating humidity
20% to 80% (no condensation allowed)
Operating pressure
700 hPa to 1,060 hPa
Storage and transport temperature
–20 °C to 60 °C (–4 °F to 140 °F)
Storage and transport humidity
20% to 90% (no condensation allowed)
Storage and transport pressure
700 hPa to 1,060 hPa
Dimensions Approx. 280 × 125 × 398 mm (w/h/d)
(11 1/8 × 5 × 15 3/4 inches)
Mass Approx. 9 kg (19 lb 13 oz)
Printing system
Sublimation heat transfer printing
Printable pixels
When printing the full-image: 2528 ×
1920 dots
Total gradation 256 levels each for yellow, magenta,
and cyan
Printing time When the printer is set to high speed:
Approximately 20 seconds
Thermal head 14.93 dots/mm
(USB) connector
Universal Serial Bus (USB)
Specification Revision 2.0
Input connector
AC IN (for power input)
Supplied accessories
Paper tray (1)
USB cable 1-824-211-41 (Sony) (1)
Ink ribbon holder (1)
Software License Agreement (1)
Before Using this Printer (1)
CD-ROM (including the printer drivers
and PDF files of multi-lingual
Instructions For Use) (1)
Service Contact List (1)
Optional accessories
UPC-55 Color Printing Pack
Medical Specifications
Protection against electric shock:
Class I
8
Specifications
Protection against harmful ingress of
water:
Ordinary
Degree of safety in the presence of a
flammable anesthetic mixture with
air or with oxygen or nitrous oxide:
Not suitable for use in the presence
of a flammable anesthetic mixture
with air or with oxygen or nitrous
oxide
Mode of operation:
Continuous
Design and specifications are subject to change without
notice.