Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
having been improperly installed in the fi rst place. Another option is that someone may knock into the glass at some point,
not cracking it, but weakening it all the same. A crack can then form days or weeks later, depending on how frequently the
fi replace is used.
Replacing the front window
•
To replace the front window, complete the steps on pages 24 to open the fi replace.
•
Now remove the window and replace it with a new one – only ever use original replacement parts! Please be careful, as the
edge of the glass is sharp.
Replacing the side window
To replace the side window, you need to remove the entire fi replace mantle. If your fi replace is wall-mounted, this will involve
taking it down from the wall. When doing so, mind your back, and make sure to properly protect the fl oor that you rest the
fi replace on.
•
Remove the top plate, which will also mean removing the fi rst segment of the fl ue pipe.
•
Remove the front plate as outlined on page 24.
•
At the bottom left and right corners are 2 bolts that you will need to remove.
•
There are also 4 bolts on the back that you will need to remove.
•
The mantle is now loose and can be slid upwards, off of the fi replace.
•
The windows are attached with two clamps, 1 on the top, and 1 on the bottom.
•
Completely unscrew the top clamp and remove it.
•
Merely loosen the bottom clamp slightly.
•
Now remove the window and replace it with a new one – only ever use original replacement parts! Please be careful, as the
edge of the glass is sharp.
Make sure to leave no fi nger marks on the cleaned glass pane when you close the appliance door. Finger marks
leave stains which will burn in the glass.
Ensure that the door is closed properly before using the fi replace
28
Werbung
Inhaltsverzeichnis
