Safety Information - Scheppach SG3200 Original Bedienungsanleitung

This power unit can power light bulbs, heaters, drills,
water pumps, etc. Do not exceed the load limit spec-
ified for the power unit.
The power unit may not be used to power devices
that have a high power requirement.
The power unit cannot be used for precision devices
such as computers. These precision devices may be
damaged by distortions caused by the broad wave
when the power unit's power is output.
Do not connect the power unit to the electrical instal-
lation of a building.
• Use the generator in a technically flawless condi-
tion only, as well as for its intended purpose, in a
safe manner and being aware of dangers, in com-
pliance with the operating instructions!
• Disruptions which can affect safety in particular
must be eliminated straight away!
• The manufacturer's stipulations concerning safety,
work and maintenance as well as the measure-
ments specified in Technical Data, must be com-
plied with.
• The relevant accident prevention stipulations and
other widely recognised safety rules must be ob-
served.
• The generator may only be used, maintained or re-
paired by personnel familiar with it and its dangers.
Unauthorised changes to the machine negate the
manufacturer's liability for damages resulting from
this.
• The generator may only be used for work for which
it has been built and which is described in the op-
erating manual.
• The generator may only be used with the manu-
facturer's original accessories and original tools.
• Every use beyond that is deemed as not intended.
The manufacturer is not liable for damage resulting
from this; the risk lies exclusively with the user.
The generator must reach its operating speed before
it can be connected to an electrical load. Disconnect
loads from the machine before turning off the motor.
In order to prevent damage caused by power surges,
ensure that the fuel tank is not completely drained
when electrical loads are connected.
Do not insert objects in the ventilation slots. This also
applies when the generator is turned off. Non-com-
pliance can lead to damage to the generator or in-
juries.
Please observe that our equipment was not designed
with the intention of use for commercial or industrial
purposes. We assume no guarantee if the product is
used in commercial or industrial applications, or for
equivalent work.
20 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

5. Safety information

This unit conforms to the prescribed safety reg-
ulations for electrical machines
• Read the usage instructions carefully before start-
ing the generator.
• Improper use may lead to personal injury and dam-
age to property. Persons who are unfamiliar with
the instructions may not operate the unit. Store the
usage instructions carefully.
• Children and young persons may not use this unit.
• The manufacturer does not take any responsibility
for damage caused by improper use or changes
to the machine.
• Also adhere to the safety information, the assem-
bly and operating instructions, as well as the ac-
cident prevention regulations that are generally
applicable.
Important note
Ensure that persons who work with this unit have
read and understood these operating instructions
before operating the unit.
Never use this unit inside buildings or in an environ-
ment that does not have ventilation.
The exhaust gases contain carbon monoxide,
which is an odourless, poisonous gas.
Attention!
The voltage of the generator fluctuates; this may
cause damage to the following devices:
• Television sets, audio-video devices,
• products or devices with electronic control
Safety instructions
Carefully read this manual, familiarise yourself with
this machine. Observe the instructions for use for
this machine, its limitations and possible hazards.
• Set up the machine on solid ground.
• The load must not exceed the specifications on the
rating plate of the generator. An overload will cause
damage to the machine or a shorter service life.
• Do not run the motor with excessive speed. Run-
ning the motor with excessive speed increases the
risk of injury. Do not change any components that
have an impact on the regular speed.
• Before carrying out adjustments on the genera-
tor or motor, remove the spark plug or the ignition
cable, respectively, to prevent accidental start-up.
• Do not operate machines with faulty or missing
components or without protective housing or cov-
ers. You can obtain information about spare parts
from your customer service.
• Do not use or store the machine in a wet or damp
environment or on highly conductive surfaces
such as metal coatings or steel constructions.