Using The Accessories; Inserting The Accessories - JUNO JB094C9 Benutzerinformation

10
Setting the END
1. Set an oven function and temperature.
2. Press again and again until
starts to flash.
3. Press or
The display shows
4. When the time ends,
an acoustic signal sounds. The
appliance deactivates automatically.
5. Press any button to stop the signal.
6. Turn the knob for the oven functions
and the knob for the temperature to
the off position.
Setting the TIME DELAY
1. Set an oven function and temperature.
2. Press again and again until
starts to flash.
3. Press or
DURATION.
4. Press .
5. Press or
6. Press to confirm.
Appliance turns on automatically later on,
works for the set DURATION time and
stops at the set END time. At the set time
an acoustic signal sounds.

USING THE ACCESSORIES

WARNING! Refer to Safety
chapters.

Inserting the accessories

Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
to set the time.
.
flashes and
to set the time for
to set the time for END.
7. The appliance deactivates
automatically. Press any button to stop
the signal.
8. Turn the knob for the oven functions
and the knob for the temperature to
the off position.
Setting the MINUTE MINDER
1. Press again and again until
starts to flash.
2. Press or
time.
The Minute Minder starts automatically
after 5 seconds.
3. When the set time ends, an acoustic
signal sounds. Press any button to
stop the acoustic signal.
4. Turn the knob for the oven functions
and the knob for the temperature to
the off position.
Cancelling the clock functions
1. Press the again and again until the
necessary function indicator starts to
flash.
2. Press and hold
The clock function goes out after some
seconds.
Deep pan:
Push the deep pan between the guide
bars of the shelf support.
to set the necessary
.