Viewing Your Position; Viewing Testpage; Changing Gps Accuracy - Motorola MTP6750 Funktionsbenutzerhandbuch

3 Select On.
NOTICE: Your service provider can enable this feature.
4.20.2

Viewing Your Position

Procedure:
1 From the home screen, press the Menu key.
2 Select Location → Position.
3 Scroll to view the results about the last time your location was calculated.
NOTICE: To refresh your position:
• Select Position — the radio refreshes its position automatically
• Press Refresh
4.20.3

Viewing Testpage

Procedure:
1 From the home screen, press the Menu key.
2 Select Location → Testpage.
3 Select one of the following:
• Position – displays detailed information on radio's current position: time, N (latitude), E
(longitude), H (height), Sats Used (a number of tracked satellites), B (bearing), HS
(horizontal speed), LC (level of confidence).
• Power – displays detailed information on a particular satellite: PRN code, Status, Mode, C/N
(carrier-to-noise ratio).
• Version – displays detailed information on software version: SW (software version), HW
(hardware version), ASIC (application-specific integrated circuit), RC (release code).
4.20.4

Changing GPS Accuracy

Procedure:
1 From the home screen, press the Menu key.
2 Select Location → Accuracy.
3 Select one of the following:
• Medium (default) – Power consumption optimization is combined with less position accuracy.
• High – Better position accuracy is combined with less power consumption optimization.
NOTICE: If connected to an external charging device, the radio automatically enters the
High mode.
Send Feedback
68015000663–CB (en-US)
Chapter 4: Main Menu
131