Type Key; Scope Of Delivery; Accessories; Transportation And Storage - Wilo Rexa UNI Einbau- Und Betriebsanleitung

Max. immersion depth See rating plate
[8]
Cable length (standard 10 m
version)
Explosion protection -
Operating modes
Immersed [OTs] S1
Non-immersed [OTe] S2-15, S3 10%*
Pressure connection
UNI V05... DN 50, PN 10
UNI V06... DN 50/65, PN 10
* Operating mode S3 25 % is permitted if the necessary
motor cooling is guaranteed before the motor is
switched on again! To ensure the required cooling, the
motor must be completely immersed for at least 1 min.
Statement of date of manufacture
The date of manufacture is stated in accordance with
ISO 8601: JJJJWww
▪ JJJJ = year
▪ W = abbreviation for week
▪ ww = calendar week
4.7

Type key

Example: Wilo-Rexa UNI V05B/T06-540/P
UNI Series
V Impeller shape = vortex impeller
05 Nominal diameter of pressure connection
Material version
B - n/a = standard version
- B = version in V4A
T Mains connection version: M = 1~, T = 3~
06 /10 = rated power P in kW
2
5 Mains connection frequency: 5 = 50 Hz, 6 = 60 Hz
40 Key for rated voltage
Additional electrical equipment:
n/a = with bare cable end
P
A = with float switch and plug
P = with plug
4.8

Scope of delivery

▪ Pump with 10 m (33 ft) cable
▪ Single-phase current version with
– Shockproof plug
– Float switch and shockproof plug
▪ Three-phase current version with
Installation and operating instructions Wilo-Rexa UNI

Transportation and storage

– Bare cable end
– Float switch and CEE plug
▪ Installation and operating instructions
4.9

Accessories

▪ Cable lengths in fixed length increments of 10 m (33 ft)
up to max. 30 m (99 ft) in single-phase current version or
max. 50 m (164 ft) in three-phase current version
▪ Suspension unit
▪ Level control devices
▪ Fixation accessories and chains
▪ Switchgear, relays and plugs
5 Transportation and storage
5.1

Delivery

After receiving the shipment, this must be checked im-
mediately for defects (damage, completeness). Defects
must be noted on the freight documentation! Further-
more, defects must be notified to the transport company
or the manufacturer immediately on the day of receipt of
shipment. Subsequently notified defects can no longer
be asserted.
5.2

Transport

WARNING
Standing under suspended loads!
Never allow anyone to stand under suspended loads!
Danger of (serious) injuries caused by falling parts.
Loads may not be carried over work places where
people are present!
WARNING
Head and foot injuries due to a lack of protect-
ive equipment!
Danger of (serious) injuries during work. Wear the fol-
lowing protective equipment:
• Safety shoes
• Safety helmet must be worn if lifting equipment
are used!
en
39