Notes On The Name Plate; Storage; Guarantee, Spare And Consumable Parts - probst JWK Serie Betriebsanleitung

Vacuum Hose Lifter Components
Lifting hose unit with Operating Valve Unit
8 Notes on the
Name Plate
Caution

9 Storage

10 Guarantee, spare and consumable parts

On the nameplate the main data for the lifting device is indicated.
The nameplate is firmly connected to the device.
The nameplate contains the following information:
Type and number are vital for identification of the unit. Indicate these when
ordering spares or filing claims and other inquiries.
The max. lifting capacity indicates for which maximum load the device can be
used. The max. load must not be exceeded.
If you are not using the Jumbo Sprint vacuum hose lifter, you should store it
correctly to best preserve the product quality. This entails the following:

Clean the product (see 7.2) and let it dry if wet

Store the product in a room that protects it from moisture and frost
(recommendation: in the manufacturer's storage case)

Storage temperature: +0 – 40 °C
To start up the system again, refer to chapter 4, "Installation"
This equipment is guaranteed in accordance with our General Conditions of
Business. This also applies to spare parts where these are original parts supplied
by us.
We will assume no liability for damage caused by the use of non-original spare
parts and accessories.
Wear and consumable parts are not covered by the guarantee.
The most important spare and consumable parts are shown in the following list.
Abbreviations: - Spare part
- Consumable part
- Consumable-part assembly, contains consumable parts
Status 08.2012 / Index 05
Type
Device number
Order number
Max. lifting capacity
Weight of device
= E
= V
= VB
Page 15/15