Inhaltsverzeichnis
Werbung
Vacuum Hose Lifter Components
Lifting hose unit with Operating Valve Unit
3.5 Accessories
Dust Filter
Motor Overload switch With this device, the blower can be switched on and off. An integrated overcurrent
Tube cylinder
Extension
Vacuum gauge
Protection Tube
Retaining net
4
Installation
4.1 Installation
Procedure
Blower Installation
Checking the Rotation
Direction
Caution
The installation of a dust filter is urgently recommended to protect the fan from all
kinds of dirt (dust from surroundings, dirty loads etc.)
Observe the enclosed installation instructions for dust filter.
Note: If no dust filter is used, foreign objects must be excluded from the guarantee
as a possible cause of failure.
switch prevents the blower motor form being damaged by high current.
The tube cylinder extension is designed for handle parts in high-sided boxes,
crates, wire-mesh boxes, etc. The tube cylinder extension has to be mounted
between the vacuum head and the control unit.
The vacuum gauge indicates the underpressure at the vacuum head and thereby
the status of operation of the lifting device. It is mounted at the control unit.
The protection tube is a protective covering for the lifting tube.
The retaining net is for space-saving storage of the lifting device. The length of the
lifting tube is reduced to a minimum.
The Vacuum Hose Lifter must be installed and maintained by qualified personnel,
mechanics and electricians. Any work on the electrical equipment may be carried
out only by a qualified electrician.
Install the vacuum blower as described in the separate operating instructions.
Before commissioning, check that the blower rotation direction corresponds with
that in the separate manual.
When mounting the suction hose, observe that the hose is hanged up spirally
turned ( at least 800 mm). Its length has to be the 1.3 to 1.5 times the jib length.
The suction hose must hang down freely. It must not lie flat, rub or catch on
anything.
Status 08.2012 / Index 05
Page 8/15
Werbung
Inhaltsverzeichnis
Fehlerbehebung
