Accessories - Black & Decker GK1640T Anleitung

Oil level
The level in the reservoir should not be allowed to
fall below a quarter full.
Chain and guide bar
After every few hours of use, remove the guide
bar and chain and clean thoroughly.
Ensure the hole between the tensioning/oil
hole (18) and the bar groove is clear.
On reassembling, the guide bar should be
turned through 180° and the sprocket nose
greased via the sprocket lubrication hole (19).
This ensures an even distribution of wear
around the guide bar rails.
To turn the guide bar through 180°, remove
the small screw from the slider and re-fasten to
the opposite side of the bar.
Saw chain sharpening
If you are to get the best possible performance
from the tool it is important to keep the teeth of
the saw chain sharp. Guidance for this procedure
is found on the sharpener package. For this purpose
we recommend the purchase of the Black & Decker
saw chain sharpening kit (available from
Black & Decker service agents and selected dealers).
Replacing worn out chains
Replacement chains are available through retailers
or Black & Decker service agents. Always use
genuine spare parts.
Saw chain sharpness
The cutters will blunt immediately if they touch the
ground or a nail whilst cutting.
Saw chain tension
Regularly check the chain tension.
Oil level
Top up if low.
What to do if your chainsaw needs repair
Your chainsaw is in accordance with the relevant
safety requirements. Repairs should only be
carried out by a qualified persons using original
spare parts, otherwise this may result in
considerable danger to the user.
We recommend you keep this user manual in a
safe place.

ACCESSORIES

Cat. no.
A6154
A6155
A6156
A6039
A6027
Protecting the environment
Separate collection. This product must not
be disposed of with normal household
waste.
Should you find one day that your Black & Decker
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and
packaging allows materials to be recycled
and used again. Re-use of recycled
materials helps prevent environmental
pollution and reduces the demand for raw
materials.
Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
Black & Decker provides a facility for the collection
and recycling of Black & Decker products once
they have reached the end of their working life.
To take advantage of this service please return
your product to any authorised repair agent who
will collect them on our behalf.
E N G L I S H
Description
300 mm / 12" chain
350 mm / 14" chain
400 mm / 16" chain
Sharpening kit
0.5 l chain oil
13