Technical Data; Appliance Description; Specified Conditions Of Use - Gude PWS 700 BR Originalbetriebsanleitung

PWS 700 BR

Technical Data

Log Cutting Saw ..............................................................PWS 700 BR
Art. No. ...............................................................................................................75785
Motor output ............................................. 4,9 kW/6,7 PS
Contents ............................................................................................270 ccm
Engine speed .............................................................................. 3200 min
Saw blade...................................................................Ø 700 mm/40 tooth
Drilling ................................................................................................. 30 mm
blade thickness ................................................................................ 4,0 mm
Max. Circular saw blade speed ............................................. 1800 min
Min./max. Ø of workpiece .................................................. 80 - 240 mm
Tank capacity/consumption ..............................petrol of 6.0 l/3.2 l/h
Oil charge .................................................................................................. 1,1 l
Weight ...................................................................................................160 kg
Noise and Vibration Information
Sound power level L
WA
Sound pressure level L
Wear ear protectors!
1) Measured according to EN ISO 3744: 1995, loaded, hazardousness K=3 dB (A)
2)
The values stated are emission values and as such do not necessarily constitute values which are safe for the
workplace. Al- though there is a correlation between emission levels and environmental impact levels, whether
further precautions are neces- sary cannot be derived from this. Factors infl uencing the actually present envi-
ronmental impact level in the workplace include the characteristics of the work area and other noise sources, i.e.
the number of machines and other neighbouring work process- es. The permitted workplace values can likewise
vary from country to country. This information is intended to assist the user in estimating hazards and risks.
Read and understand the ope-
rating instructions before using
the appliance. Abide by all the
safety measures stated in the service manual. Act
responsibly toward third parties. In case of any doubts
about connection and operation refer please to our
customer center.

Appliance description

1
Feed cradle
2
Saw blade cover
3
Tension spring
4
Transport protection
5
Travelling wheels
6
Engine
A
Fuel tank
B
Oil fi ller neck
C
Starting cable
7
Carrying handle
8
Emergency Switch
1), 2)
.......................................................112 dB (A)
........................................................... 95 dB (A)
PA
D
Air damper control (choke)
E
throttle-lever
F
Petrol tap
-1
at 3,600 per min
-1
-1
Specifi ed Conditions Of Use
The circular saw for fi rewood is used for cross cutting
of fi rewood. It is necessary to follow all technical
specifi cations and safety instructions.
Pieces of wood that are too short, too light or too thin
to get caught by the barbs in the feed cradle must not
be processed by the machine.
The machine may only be operated by one
person.
Make sure there is nobody present in the dan-
gerous area. The minimum distance is 2 m.
Use the appliance only outside, never use it in
confi ned and bad ventilated areas.
Do not use this product in any other way as stated for
normal use.
Not observing general regulations in force and
instructions from this manual does not make the
manufacturer liable for damages.
ENGLISH
31