Technical Data; Emergency Procedure - Gude STS 800 EL Originalbetriebsanleitung

Technical Data

Jigsaw
Art. No
Service connection
Rated input
Stroke rate under no-load
Lengths of stroke
Bevel cuts up to
Cutting depth Wood
max. in:
Steel plate
Weight
Noise details
Sound pressure level L
1)
pA
Sound power level L
WA
Measured according to EN 60745; Uncertainty K =
3 dB (A)
Wear ear protectors!
Vibration details
Total vibration values (triaxial vector sum) Deter-
mined properly EN 60745:
cutting boards:
Vibration emission value a
cutting sheet metal:
Vibration emission value a
Uncertainty K = 1,5 m/s
2
WARNING: The vibration emission level will vary
because of the ways in which a power tool can be
used and may increase above the level given in this
information sheet.
The vibration emission level may be used to compare
one tool with another.
It may be used for a preliminary assessment of
exposure.
An accurate estimate of the vibratory load
should also take into account the times when the
tool is shut down or when it is running but not
actually in use. This may significantly reduce the
vibratory load over the total working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Read and understand the operating
instructions before using the
appliance. Familiarise with the
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
STS 800 EL
58126
230 V ~ 50 Hz
800 W
800 - 3000 min
-1
20 mm
45 °
80 mm
10 mm
2,1 kg
92 dB(A)
103 dB(A)
8,693 m/s²
h,B
8,478 m/s²
h,M
The operator is responsible for accidents or risks to
third parties.
Persons over 16 years of age can only work on the
appliance. An exception includes youngsters trained
in order to reach knowledge under supervision
of the trainer during occupational education.
In case of any doubts about connection and operati-
on refer please to our customer center
Specified Conditions Of Use
This jig saw is intended to cut wood, plastic and
metal; it can cut straight lines, bevels, curves, and
internal cut-outs.
Do not use this product in any other way as stated
for normal use. Not observing general regulations
in force and instructions from this manual does not
make the manufacturer liable for damages.
In spite of compliance with all relevant design regula-
tions, dangers may still present themselves when the
machine is operated, e.g.:
• noise emissions
• dust emissions
• vibrations to hand and arms

Emergency procedure

Conduct a first-aid procedure adequate to the injury
and summon qualified medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. If you seek help, state the
following pieces of information: 1. Accident site, 2.
Accident type, 3. Number of injured persons, 4. Injury
type(s)
Symbols
WARNING / Caution!
Read the operating instructions to reduce
the risk of injury.
Wear eye protective goggles !
Wear ear protectors!
Wear a suitable dust protection mask.
Wear gloves!
Unplug the machine before any work
on it.
Class II tool.
ENGLISH
13