SPORTSTECH HGX200 Benutzerhandbuch Seite 74

A Attach the 3890 mm Upper cable (39#) through the opening of the upper frame , Make sure the ball stopper should
be in front of the upper frame, Place 1PC Pulley (74#) below the cable and secure the 1st pulley using 1PC M10 × 45
Allen bolt (94#) ,2PC ø10 washer (105#) and 1pc M10 Aircraft nut (103#).
B Draw the cable backwards and place the 2st pulley below the cable , Secure the pulley with the same way in A.
C Draw the cable around the pulley and front , Place the 3st pulley below the cable and secure it with 1PC M10×160
Allen bolt (100#), 2PC ø10 washer (105#) and 1pc M10 Aircraft nut (103#).
D Draw the cable around the pulley and backwards,Place the 4st pulley below the cable and secure it with the same way
in A.
E Draw the cable around the pulley and downwards,Place the 5st pulley below the cable, Secure the pulley with 1pc
M10*50 Allen bolt(95#), 2PC ø10 washer (105#) ,2pcs bushing (44#),double floating pulley bracket (30#),and 1pc
M10 Aircraft nut (103#).
F Draw the cable around the pulley and upwards ,Place the 6st pulley below the cable and secure it with 1pc M10*65
Allen bolt (93#),2pcs bushing (41#) and 1 pc M10 Aircraft nut(103#).
G Draw the cable around the pulley and downwards,Thread the end of the upper cable to the top opening of the selector
rod at least 5 laps to keep safe.
74