Appliance Self-Test; Starting The Appliance Self-Test; Ending The Appliance Self-Test; Customer Service - Gaggenau RT 222 Gebrauchsanleitung

Appliance self-test

Your appliance features an automatic self-test
program which shows you sources of faults which
may be repaired by customer service only.

Starting the appliance self-test

1. Switch off the appliance with the On/Off
button ÿ and wait 5 minutes.
2. Switch on the appliance with the On/Off button
ÿ and then press and hold down the fast button
Û for 3–5 seconds within the first 10 seconds
until an audible signal sounds.
The self-test programme starts.
While the self-test is running, a long audible
signal sounds in the meantime.
If 2 audible signals sound and the set temperature is
displayed after the self-test has ended, your appliance
is OK.
If 5 audible signals sound and the fast button Û
flashes for 10 seconds after the self-test has ended,
there is a fault. Inform customer service.

Ending the appliance self-test

When the programme has ended, the appliance
switches over to normal operation.
38

Customer service

Your local customer service can be found
in the telephone directory or in the customer-service
index. Please provide customer service with
the appliance product number (E-Nr.) and production
number (FD-Nr.).
These specifications can be found on the rating plate.
To prevent unnecessary call-outs, please assist
customer service by quoting the product
and production numbers. This will save you additional
costs.

Repair order and advice on faults

Contact information for all countries can be found
on the enclosed customer service list.
GB 0344 892 8988
IE 01450 2655
US 877 442 4436
E - Nr
FD - Nr
Calls charged at local or
mobile rate.
0.03 € per minute at peak.
Off peak 0.0088 € per
minute.
toll-free