Warranty; Technical Data; Vibration Value; Declaration Of Conformity - Kärcher CNS 18-30 Battery Bedienungsanleitung

Warranty

The warranty conditions issued by our relevant sales
company apply in all countries. We shall remedy possi-
ble malfunctions on your appliance within the warranty
period free of cost, provided that a material or manufac-
turing defect is the cause. In a warranty case, please
contact your dealer (with the purchase receipt) or the
next authorised customer service site.
(See overleaf for the address)

Technical data

Device performance data
Working voltage of the battery
No-load chain speed
Chain oil tank volume
Determined values in acc. with EN 60745-1, EN
60745-2-13
Sound pressure level L
pA
Uncertainty K
pA
Sound power level L
wA
Uncertainty K
WA
Front handle hand-arm vibration
value
Rear handle hand-arm vibration
value
Uncertainty K
Dimensions and weights
Length x width x height
Guide rail length
Cutting length
Chain pitch
Weight (without battery pack)
Subject to technical modifications.

Vibration value

WARNING
The specified vibration value was measured using a
standard test procedure and may be used to compare
devices.
The specified vibration value may be used in a provi-
sional assessment of the load.
Depending on the way the device is used, the vibration
emission can deviate from the specified overall value
during the current use of the device.
Device with a hand-arm vibration value
> 2.5 m/s² (see chapter Technical Data in the
operating instructions)
CAUTION
● Uninterrupted use of the device
for several hours can lead to numbness. ● Wear warm
gloves to protect your hands. ● Take regular breaks
from work.
28
CNS 18-
30
V 18
m/s 10
ml 200
dB(A) 87,9
dB(A) 3,0
dB(A) 98,9
dB(A) 1,4
2
m/s 3,5
2
m/s 5,2
2
m/s 1,5
mm 735 x
230 x
247
mm 300
mm 250
in (mm) 0,375
(9,525)
kg 3,2
English

Declaration of Conformity

EU Declaration of Conformity
We hereby declare that the machine described below
complies with the relevant basic safety and health re-
quirements in the EU Directives, both in its basic design
and construction as well as in the version placed in cir-
culation by us. This declaration is invalidated by any
changes made to the machine that are not approved by
us.
Product: Cordless chainsaw
Type: 1.444-00x.x
Currently applicable EU Directives
2014/30/EU
2006/42/EC (+2009/127/EC)
2011/65/EU
2000/14/EC (+2005/88/EC)
Harmonised standards used
EN 50581: 2012
EN 55014-1: 2017
EN 55014-2: 2015
EN 60745-1:2009+A11:2010
EN 60745-2-13:2009+A1:2010
Conformity evaluation procedure used
2000/14/EC and amended by 2005/88/EC: Annex V
Sound power level dB(A)
Measured:98,9
Guaranteed:101
Notified body, 0197 TÜV Rheinland LGA Products
GmbH; Tillystraße 2 D - 90431 Nürnberg, Germany has
carried out EC type approval, registration number: BM
50452503 0001
The signatories act on behalf of and with the authority of
the company management.
Documentation supervisor:
S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Ph.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2018/09/01
Declaration of Conformity (UK)
We hereby declare that the product described below
complies with the relevant provisions of the following
UK Regulations, both in its basic design and construc-
tion as well as in the version put into circulation by us.
This declaration shall cease to be valid if the product is
modified without our prior approval.
Product: Cordless chainsaw
Type: 1.444-00x.x
Currently applicable UK Regulations
S.I. 2016/1091 (as amended)
S.I. 2008/1597 (as amended)
S.I. 2012/3032 (as amended)
S.I. 2001/1701 (as amended)
Designated standards used
EN 50581: 2012