Protective Clothing; Description Of The Device - Kärcher CNS 18-30 Battery Bedienungsanleitung

Danger of death from kickback of the
chainsaw. Never touch the objects to be
sawn with the tip of the guide rail.
Danger of death due to uncontrolled
movements of the chainsaw. Always hold
the chainsaw tightly with both hands.
Danger of death due to uncontrolled
movements of the chain saw. Never hold
the device with just one hand.
Do not subject the device to rain or moist
conditions.
The guaranteed sound level specified on
the label is 101 dB.
The chain brake is released.
The chain brake is locked and the saw
chain is blocked.
Turn to adjust the chain tension:
= Tension the chain
= Loosen chain
Running direction of the chain (marking
is under the bar cover)
Lock the chain tensioner
Unlock the chain tensioner

Protective clothing

DANGER
Risk of fatal injury from cut injuries. Wear suitable pro-
tective clothing when working with the device. Observe
the local regulations for accident prevention.
Head protection
When working with the device, wear a suitable safety
helmet that complies with EN 397 and is CE marked.
When working with the device, wear hearing protection
that complies with EN 352-1 and is CE marked.
For protection against flying splinters, wear suitable
safety goggles that comply with EN 166 or are CE
marked. Or wear a helmet visor that complies with EN
1731 and is CE marked.
Protective helmets with hearing protection and a safety
visor are available in specialist shops.
Chainsawing jacket
Wear a chainsawing jacket satisfying the requirements
of EN 381-11 and labelled with the CE marking when
working with the device.
Wear suitable protective gloves with cut protection
equipment that comply with EN 381-7 and are CE
marked when working with the device.
Wear suitable leg protectors with all-around protection
that comply with EN 381-5 and are CE marked when
working with the device.
Wear non-slip safety shoes that comply with EN 20345
and are marked with a chainsaw symbol working with
the device. This ensures that the safety shoes comply
with EN 381-3.
If you only use the chainsaw occasionally, the ground is
level and there is little danger of tripping or snagging in
bushes, you can use safety shoes with steel front caps
and protective leggings that comply with EN 381-9.

Description of the device

The maximum amount of equipment is described in
these operating instructions. Depending on the model
used, there are differences in the scope of delivery (see
packaging).
See graphics page for illustrations
Illustration A
Chain
1
Guide rail
2
Bucking spikes
3
Chain oil tank cap
4
Hand guard/chain brake lever
5
Handle, rear
6
Trigger
7
Trigger lockout button
8
Battery pack unlocking button
9
Bar cover
10
Handle, front
11
Ring for adjusting the chain tension
12
Chain tensioner knob
13
Chain catcher
14
Type plate
15
Chain oil
16
Bar scabbard
17
*Battery Pack Battery Power 18V
18
*Quick Charger Battery Power 18V
19
* optional
Rechargeable battery pack
The device can be operated with a 18 V Kärcher Bat-
tery Power battery pack.
English
Protective gloves
Leg protection
Safety shoes
23